Cisco Cisco TelePresence Management Suite (TMS) Version 15 Document
Endpoint Products
Cisco TelePresence System MXP Series
At a glance
TMS version tested
13.1.2
Product status
Maintain
Product software versions -
tested
tested
F9.1
Product software versions -
target
target
F9.x
Cisco TelePresence System MXP Series represents all single codec Cisco TelePresence Systems based
on the MXP family of codecs that that run the F line of software. This includes room, integrator, and
personal systems such as:
on the MXP family of codecs that that run the F line of software. This includes room, integrator, and
personal systems such as:
Cisco TelePresence System 1000 MXP
Cisco TelePresence System 1700 MXP
Cisco TelePresence System Profile 3000 MXP/6000 MXP
Cisco TelePresence System Codec 3000 MXP/6000 MXP
Cisco TelePresence Set-top 770/880/990
Cisco TelePresence System Edge 75 MXP/85 MXP/95 MXP
Integrated systems or vertical products based on 3000 MXP or 6000 MXP systems are also included but
may only be identified as a codec instead of a larger system and the functionality will be limited to the
same as a standalone codec.
may only be identified as a codec instead of a larger system and the functionality will be limited to the
same as a standalone codec.
Configuration Requirements
The following configuration requirements must be met for the device to be managed by Cisco TMS in the
traditional ‘Managed by Cisco TMS’ mode:
traditional ‘Managed by Cisco TMS’ mode:
Cisco TMS must use the admin user account on the device and must have the password for that
account.
account.
SNMP Mode
– set to On for full functionality.
SNMP CommunityName - set to a
value listed in Cisco TMS’s list of SNMP community names.
FTP Mode
– set to On for full functionality.
The following settings are required, but can be configured automatically by Cisco TMS after the device is
added to Cisco TMS if Enforce Management Settings is enabled (recommended)
added to Cisco TMS if Enforce Management Settings is enabled (recommended)
SNMP HostIPAddr
– one entry set to the network address of the Cisco TMS server.
CorporateDirectory Mode - set to On.
CorporateDirectory Protocol - set to HTTP.
CorporateDirectory Address - set to the network address of Cisco TMS.
ExternalManager Address - set to the network address of the TMS server. Can be set
automatically via DHCP Option 242 if using DHCP.
automatically via DHCP Option 242 if using DHCP.
ExternalManager Path - set to the management web service path for Cisco TMS.
ExternalManager Protocol - set to HTTP.