Cisco Cisco TelePresence Management Suite (TMS) Version 15 Document
Infrastructure Products
Network Requirements when Cisco TMS managed
To be managed by Cisco TMS, a system requires full bi-directional communication over the IP network to
Cisco TMS with the following ports and protocols.
Cisco TMS with the following ports and protocols.
8443 https
Service
Protocol
Port
Number
Number
Allows Connections
(relative to system)
(relative to system)
HTTPS
TCP
443
Inbound
CUCM Services
TCP
8443
Inbound
Cisco TMS Behind Firewall mode
Supported
No
Changes to
Requirements
Requirements
This system type is not supported by Behind Firewall mode, so its configuration and network
requirements do not change.
requirements do not change.
Cisco TMS Secure-Only mode
Supported
No
Changes to
Requirements
Requirements
This system type is not supported by secure-only mode, so its configuration and network
requirements do not change.
requirements do not change.
Device Notes/Limitations
Use of Cisco Unified CM version 8.6.x or later is necessary for Native Interop modes and is strongly
suggested for its later SIP functionalities in TelePresence
suggested for its later SIP functionalities in TelePresence
A
Managed System
tab is added to System Navigator for the system to show the details of
telepresence systems known to the Unified CM
Due to lack of SNMP usage, when adding this type of system into Cisco TMS, you must use the
Discovery Non-SNMP Systems option when adding the system.
Discovery Non-SNMP Systems option when adding the system.