Cisco Cisco TelePresence Management Suite (TMS) Version 15 Document
Infrastructure Products
Service
Protocol
Port
Number
Number
Allows Connections
(relative to system)
(relative to system)
HTTP
Or
HTTPS
Or
HTTPS
TCP
TCP
TCP
80
443
443
Inbound
HTTP
Or
HTTPS*
Or
HTTPS*
TCP
TCP
TCP
80
443
443
Outbound
SNMP (optional)
UDP
161
Inbound
* Only used when Secure-Only Management is enabled, otherwise provisioning/feedback/phonebooks
must use HTTP for connections to Cisco TMS and HTTP must not be blocked on the network.
must use HTTP for connections to Cisco TMS and HTTP must not be blocked on the network.
Note: Network systems that rewrite source addresses will interfere with communications to Cisco TMS
and proxies that require authentication may also hinder communications from systems to Cisco TMS.
and proxies that require authentication may also hinder communications from systems to Cisco TMS.
Cisco TMS Behind Firewall mode
Supported
No
Changes to
Requirements
Requirements
This system type is not supported by Behind Firewall mode, so its configuration and network
requirements do not change.
requirements do not change.
Cisco TMS Secure-Only mode
Supported
Yes
Changes to
Requirements
Requirements
The network requirements change in that HTTP and SNMP will not be used and no longer are
required. All connectivity to the system will be via HTTPS (TCP Port 443) inbound and
outbound with the system. When enabled, the management URL setting in the managed
system will be changed to HTTPS instead of HTTP.
required. All connectivity to the system will be via HTTPS (TCP Port 443) inbound and
outbound with the system. When enabled, the management URL setting in the managed
system will be changed to HTTPS instead of HTTP.
Device Notes/Limitations
Advanced Security Mode can not
be used as it disables the ‘admin’ account which Cisco TMS must
use to login to the device
CDR Logging is not functioning for X7.2 See CDETS Case CSCub66229 for status updates
Use of the SNMP service in the device is optional. If not enabled, automatic discovery of the device
is not available, and the device must be added as with Discovery Non-SNMP Systems option
enabled when adding it into Cisco TMS.
is not available, and the device must be added as with Discovery Non-SNMP Systems option
enabled when adding it into Cisco TMS.