Cisco Cisco IP Contact Center Release 4.6.1 Installation Guide
5-25
Cisco ICM Software Upgrade Migration Guide, Release 6.0(0)
Chapter 5 ICM 4.6.2 to ICM 5.0 Common Ground Upgrade Migration
Common Ground Upgrade Migration Activities
Setup is about to convert GeoTel registry to Cisco registry and rename icr
directory to icm directory. After the conversion, please perform upgrade to all on
the icm system. Do you want to continue?
directory to icm directory. After the conversion, please perform upgrade to all on
the icm system. Do you want to continue?
Step 4
Select Upgrade All. The Upgrade all ICM instances dialog appears.
Step 5
Press OK to upgrade all instance components of this system.
Caution
Do not proceed if the upgrade states that it cannot remove files from the \icm\bin
directory.
directory.
The files left in the \icm\bin directory are the ones that could not be removed.
Typically, this is caused by rttest.exe running in the background. To fix this, do
the following:
Typically, this is caused by rttest.exe running in the background. To fix this, do
the following:
a.
Start the Task Manager by right-clicking on the task bar and choosing Task
Manager.
Manager.
b.
Select the Processes tab then right click on rttest.exe and select End Task.
Look for multiple instances of this process running in task manager.
Look for multiple instances of this process running in task manager.
c.
Once finished, reboot each machine as requested by setup. Remember, delay
rebooting the Logger until the Router is fully upgraded.
rebooting the Logger until the Router is fully upgraded.
Note
If the Restart Windows dialog appears with the message:
Some files could not be updated because they are currently in use by other
programs on the system. Files in use will be updated the next time you restart the
system.
Select Yes, I want to restart my computer now, then OK.
Some files could not be updated because they are currently in use by other
programs on the system. Files in use will be updated the next time you restart the
system.
Select Yes, I want to restart my computer now, then OK.
Step 6
Apply the necessary Hot Fixes as directed by the Hot Fix Readme file.
Step 7
Start the PG processes using ICM Service Control.
Step 8
Ensure that the PGs have returned no errors following the upgrade and the
subsequent reboot.
subsequent reboot.
a.
Check the log for errors. The icmsetup.log file is located in the C:\temp
directory. Change to the C:\temp directory and perform the following
command line checks.
directory. Change to the C:\temp directory and perform the following
command line checks.
–
Search for errors using: findstr /i error icmsetup.log.