Apple powermac g3 blue.white Service Manual
Troubleshooting
Symptom Charts/Network Problems - 60
Network Problems
Ethernet connection
drops off line by itself
1 Try another Ethernet cable.
2 Reinstall the Ethernet driver.
3 Possible network problem. Troubleshoot the network.
Unable to switch to
the Ethernet network
option in the control
panel
1 Use a known-good Ethernet cable and connect properly to an
known-good network.
2 Reset parameter RAM. Hold down Command-Option-P-R
during startup but before “Welcome to Macintosh” appears.
3 Boot from the system CD that came with the unit. Open the
Network control panel and switch to Ethernet. Are you able to
switch to Ethernet and see Ethernet devices on the network
now? If so, troubleshoot software Extensions or reinstall
system software.