Apple powermac g3 blue.white Service Manual
Troubleshooting
Symptom Charts/Network Problems - 61
Unable to see any
network devices
1 Open the Network control panel and select the Ethernet
option. Verify that you can now see devices on the network.
2 Reset parameter RAM. Hold down Command-Option-P-R
during startup but before “Welcome to Macintosh” appears.
3 Boot from the system CD that came with the unit. Open the
Network control panel and switch to Ethernet. Are you able to
switch to Ethernet and see Ethernet devices on the network
now? If so, troubleshoot software Extensions or reinstall
system software.
4 Try connecting to a known-good Ethernet port at the wall or
external hub.
5 Verify that other users are experiencing the same problem.
If, so contact the network administrator. If not, go on to the
next step
6 Replace the logic board.