Alcatel-Lucent omniacces-voip gateway User Manual

Page 5-100

Specify E&M immediate start time to wait before beginning digit collection.

The 

 command must be set to the corresponding protocol type before 

any commands for E&M (Wink Start, Immediate Start, and Delay Start Signaling), and FXS/
FXO (Loop and Ground Start) commands will take effect.

Definitions: 
slot

Specifies chassis slot number where VSM is installed, (e.g., 

).

Specifies physical port number on voice daughtercard, (e.g., 

).

The first number in the range of voice channels (e.g., 

).

The last number in the range of voice channels (e.g., 

). 

♦ Syntax Note ♦

Be sure to separate the start and end range numbers with a 

hyphen (e.g., 

).

Specifies time period, in milliseconds from 0 to 60,000, (e.g., 

), to wait for the voice 

daughtercard to be ready before collecting digits. The line stays off-hook and generates a 
dial tone if glare condition detected in the interim.

♦ Syntax Note ♦

Do not use commas when entering the E&M immediate start 
time value, i.e., time to wait for before digit collection is enabled 
and an off-hook congestion tone with glare condition is reported 
(for example, 

 will return a syntax error message).

Default:
The default value is 

 milliseconds.

Command Examples: