3com TR User Manual
Bridge Configuration
4-3
Bridge Configuration
The bridge configuration section includes information
on the following:
on the following:
■
Source Routing Transparent (SRT)
■
Source Route (SR)
■
Transparent (TP)
■
Spanning Tree Fields
Setting Source Routing Transparent (VT100)
NOTE:
This bridge setting requires that you reset the
1
Log on to the Switch 2000 TR.
2
Select Switch Management from the Main Menu.
3
Press [Space Bar] and select *Bridge*.
4
Select SETUP. The TR Bridge Setup screen appears.
Figure 4-4 TR Bridge Setup Screen
5
Select OK.
6
Select *SRT*. Press [Space Bar] to change.
7
Press [Return].
8
Select *IBM*, *802.1d*, or *disabled* in the Span-
ning Tree Support field. A BPDU value is automatically
assigned:
ning Tree Support field. A BPDU value is automatically
assigned:
■
802.1d Spanning Tree—80-01-43-00-00-00
■
IBM Spanning Tree—C0-00-00-00-01-00
9
Assign a Bridge Number. Enter in Hex. Choose from 0
to f.
to f.
10
Select OK.
11
From the Main Menu, press [Space Bar] until *Port*
appears. Select the proper unit and port ID to config-
ure.
appears. Select the proper unit and port ID to config-
ure.
12
Select SETUP. The TR Port Setup screen appears. See
Figure 4-5.
Figure 4-5.
Figure 4-5 TR Port Setup Screen