HP C7000 User Manual

 

Removal and replacement procedures  47 

  

 

17. 

Remove the two slotted T-15 Torx screws that secure the interconnect board. 

18. 

Remove the interconnect board. 

 

To replace the component, reverse the removal procedure. 

 

Insight Display signal pass-thru board 

  

 

WARNING:

  To reduce the risk of damage to the midplane and component connectors, always 

remove or disengage and extend all blades and power supplies 7.62 cm (3 in) before 

removing or installing the rear cage. 

  

To remove the component: 

1. 

Power down the server blades ("

" on page 

2. 

Power down the enclosure (on page 

). 

3. 

Disconnect all cables.