HP C7000 User Manual
Removal and replacement procedures 45
e.
Use the handholds to extend and remove the rear cage from the enclosure.
To replace the component, reverse the removal procedure.
Insight Display front-to-rear interconnect board
WARNING:
To reduce the risk of damage to the midplane and component connectors, always
remove or disengage and extend all blades and power supplies 7.62 cm (3 in) before
removing or installing the rear cage.
To remove the component:
1.
Power down the server blades ("
" on page
2.
Power down the enclosure (on page
3.
Disconnect all cables.
4.
Remove the half-height and full-height blades ("
5.
Remove the device bay blanks ("
6.
Remove the power supplies and power supply blanks ("
" on page
7.
Remove the fans ("
8.
Remove the fan blanks ("
" on page
9.
Remove the interconnect switches and Pass-Thru modules ("
on page
10.
Remove the interconnect blanks ("
11.
Remove the Onboard Administrator tray ("
For this procedure, you can remove the Onboard Administrator tray with the Onboard Administrator
modules or blanks installed.
modules or blanks installed.
12.
Remove the rear cage ("
WARNING:
To reduce the risk of personal injury or equipment damage, at least two people
are needed to safely move the rear cage.