HP color laserjet 1600 series Service Manual

Trailing Edge Over-
development (half-speed)

Off

EEC95-14

Mottle Prevention

Off

EEC96-12

Will increase the developer
DC bias

Less Duplex Transfer Current Off

EEC68-10

EEC92>-1

Decreases transfer bias on
the 2nd side of duplex jobs.
For media that has low
resistivity after fusing.

More Duplex Transfer Current Off

EEC68-10

Increases transfer bias on
the 2nd side of duplex jobs.
For media that has high
resistivity after fusing.

*

> means write xxh to bits 11–15

**

> means +/-y to bits 9–15

Print-quality settings affect how light or dark the print is on the page and the style in which the
graphics are printed. You can also use the print-quality settings to optimize the print quality for a
specific media type.

You can change the settings in the device properties to accommodate the types of jobs that you are
printing. The following settings are available, depending on the printer driver that you are using:

●

Draft (600 dpi)

●

Normal (Image REt 2400)

Changing the resolution can change the formatting of your text.

To change the print-quality settings only for the current software program, open the properties
through the Print Setup menu in the program that you are using to print.

For Windows 98, Windows 2000, and Windows Me:

In the Windows system tray, click Start, select Settings, and then click Printers.

Right-click the device icon.

Click Properties (in Windows 2000, you can also click Printing Preferences).

Change the settings, and click OK.

  Optimize menu (continued)

ENWW

Print problems

123