HP pavilion tx2000 Service Manual
Pen holder
Description
Spare part number
Pen holder
tbd-001
Pen eject assembly
464113-001
Before removing the pen holder, follow these steps:
1
.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2
.
Disconnect all external devices connected to the computer.
3
.
Disconnect the power cord.
4
.
Remove the battery (see
5
.
Remove the following components:
a
. Pen (see
)
b
c
. Memory module compartment cover (see
)
d
. Optical drive (see
)
e
. Keyboard (see
f
.
Switch cover (see
g
)
h
. Top cover (see
i
.
Power switch assembly (see
j
.
System board (see
Remove the pen holder:
1
.
Remove the Phillips PM2.0×3.0 screw (1) that secures the pen eject assembly to the base enclosure.
2
.
Remove the pen eject assembly (2).
3
.
Remove the two Phillips PM2.0×3.0 screws (3) that secure the pen holder to the base enclosure.
Component replacement procedures 63