Canon imageclass mf4890dw User Manual

The machine’s memory is full.

Print, send, or delete any documents stored in memory.

The data size exceeds the machine’s 
available memory.

Reduce the data resolution or change the fi le format to reduce 
the data size. 

A user canceled a job that is 
processing to be sent or received. 

Try to send or receive the document again. 

A document waiting to be sent or 
received has been canceled by a 
user.

Try to send or receive the document again.

Follow the recommended actions for each symptom to improve the output quality.

If you cannot solve the problem with the following actions, 
see [Troubleshooting] in the e-Manual.

Verify that the appropriate paper is being used (

p.22).

Print a test page with new paper.

Verify that the paper is loaded properly (

p.22).

Change the <Special Mode V> setting from the operation panel.

Verify that the appropriate paper is being used (

p.22).

Print a test page with new paper.

Verify that the paper is loaded properly (

p.22).

Remove any foreign objects inside the machine.

Change the <Special Mode V> setting from the operation panel.

Verify that the appropriate paper is being used (

p.22).

Print a test page with new paper.

Verify that the paper is loaded properly (

p.22).

Check the toner level (

p.87).

Change the <Special Mode J> setting from the operation panel.

Verify that the appropriate paper is being used (

p.22).

Print a test page with new paper.

Check the toner level (

p.87).

If printing high-contrast documents from a computer, open the 
printer driver and select [Finishing]  [Advanced Settings]  
[Special Print Mode]  [Special Settings 2] to adjust the density.

Verify that the appropriate paper is being used (

p.22).

Print a test page with new paper.

Change the <Special Mode K> setting from the operation panel.