Canon pixma mp600 Quick Setup Guide

Page of 112
60
Routine Maintenance
Aligning the Print Head
If ruled lines are printed misaligned or print results are otherwise unsatisfactory, adjust the print head 
position.
„
Automatic Print Head Alignment
1
Make sure that the machine is turned on, and then load a sheet of A4 or Letter-
sized plain paper in the Auto Sheet Feeder.
2
Open the Paper Output Tray, and then open the Output Tray Extension.
(1) Put your finger in the rounded indent of the Paper Output Tray and open it gently.
(2) Open the Output Tray Extension.
3
Adjust the print head position.
(1) Select Settings on the HOME screen.
(2) Select Maintenance, then press the OK button.
The Maintenance screen is displayed.
(3) Select Auto head align, then press the OK 
button. 
The confirmation screen is displayed.
(4) Select Yes, then press the OK button. 
The print head is aligned automatically, and the 
print head pattern after the adjustment is 
printed out. This takes about 4 minutes.
Note
Make sure that the Inner Cover is closed.
Note
You cannot feed paper from the Cassette when performing Automatic Print Head Alignment. 
Always load paper in the Auto Sheet Feeder.
Note
If you select Head alignment print, the machine 
exits the process after printing the current head 
position adjustment values.
Note
z
The print head alignment pattern is printed in 
black and blue.
z
If adjustment was not done successfully, the 
Auto head align has failed.” error message 
is displayed on the LCD. For details, see “Error 
z
If results of Automatic Print Head Alignment 
are not satisfactory, perform Manual Print Head 
Alignment. For details, see “Manual Print Head 
(3)
(4)
downloadlike
ArtboardArtboardArtboard
Report Bug