Sony DASK-S704 User Manual
8
(GB)
5
Insert the CD-ROM, and lightly press the front end of the CD tray or
the Z key to close the tray.
the Z key to close the tray.
The DRE-S777 starts running and the DASK-S704 Sampling Function
Software is loaded from the CD-ROM. The loading is complete within
about 3 minutes. After loading, the DASK-S704 initial display appears.
Software is loaded from the CD-ROM. The loading is complete within
about 3 minutes. After loading, the DASK-S704 initial display appears.
SAMPLE
Enter
Rehearsal
Sampling
Compile
Change MS
Compile
Change MS
MS:xxxxxxxx 24MB Available
Fs/Period=Fs/5.5sec
Repeat =16
Input =AD
Clock =Internal 48.0 kHz
Fs/Period=Fs/5.5sec
Repeat =16
Input =AD
Clock =Internal 48.0 kHz
Removing the Memory Stick
1
Press the EJECT button on the PC card adapter.
2
Remove the Memory Stick.
To use the Memory Stick again
Reinsert it into the slot of the PC card adapter.
Notes
• You can remove the Memory Stick or the PC card adapter in the following
cases only:
— When the DRE-S777 is turned off.
— When a message on the display indicates changing the Memory Stick,
— When the DRE-S777 is turned off.
— When a message on the display indicates changing the Memory Stick,
such as “Please change MS.”
To avoid damaging the data in the Memory Stick, do not remove the
Memory Stick or the PC card adapter in other cases.
Memory Stick or the PC card adapter in other cases.
• Do not remove the Memory Stick immediately after it is inserted. As it
will take about five seconds for the unit to recognize the inserted Memory
Stick, quick removal of the Memory Stick will cause an error, freezing the
system. If the system is stopped, turn off the power and turn it on again.
Stick, quick removal of the Memory Stick will cause an error, freezing the
system. If the system is stopped, turn off the power and turn it on again.
With the label
facing up
facing up
1
2
EJECT button
Starting the DASK-S704