Panasonic cf-51mcmddbm User Manual

26

When you want to display 
the fonts or icons at a larger 
size

z Change the size of the icons, etc. using “Icon Enlarger” (

⇒Reference Manual “Icon 

Enlarger”).

z You can also change the settings as follows (for more details, refer to the Windows 

Help).

A Select [start] - [Control Panel] - [Appearance and Themes] - [Display] - 

[Appearance].

B Select the font size in [Font size], and select [Effects] and then add the 

check mark for [Use large icons] to increase the icon size.

C Select [OK], then select [OK].

z To enlarge a part of the screen, use Loupe Utility (

⇒Reference Manual “Loupe Util-

ity”).

During simultaneous 
display, one of the screens 
becomes disordered

z Try changing the display by pressing 

Fn+F3.

z If you continue to experience problems, try changing the display destination in the 

following menu.
[start] - [Control Panel] - [Other Control Panel Options] - [Intel(R) GMA Driver for 
Mobile] - [Devices]

z When the [Command Prompt] is set to "Full Screen" by pressing 

Alt + Enter, the 

picture is displayed on one of the screens only. When the window display is restored 
by pressing 

Alt + Enter, the picture is displayed on both screens.

z Simultaneous display cannot be used until Windows startup is complete (during 

Setup Utility, etc.). When the 

Fn+F3 key is pressed, the screen is displayed on the 

external display or internal LCD.

When a video such as an 
MPEG file and a DVD video 
is being played with 

WinDVD or Windows

®

 

Media Player, the display 
destination cannot be 
switched using 

Fn+F3

z The display destination cannot be switched while a video such as an MPEG file and 

a DVD video is playing.
Stop playing the video before switching the display destination.

When the screensaver is 
set, an error will occur dur-
ing a resume operation

z When the computer automatically enters the standby or hibernation mode while the 

screensaver is running, an error may occur during a resume operation. In such 
cases, turn off the screensaver or try changing the pattern of the screensaver.

„ Shutting down

Windows cannot be shut 
down or restarted

z If a USB device is connected, try removing it.
z It may take one or two minutes to shut down.

„ Battery Indicator

The red indicator lights

z The battery level is very low (the charge is approx. 9% or less). 

Connect the AC adaptor. You can use the computer when the indicator light is 
orange. If you do not have an AC adaptor, save your data and power off your 
computer. After replacing the battery pack with a fully charged one, turn your 
computer on.

The red indicator blinks

z Quickly save your data and power off your computer. Remove the battery pack and 

disconnect the AC adaptor, then connect them again.
If the problem persists, contact Panasonic Technical Support.  The battery pack or 
charging circuit may be defective. 

The green indicator blinks

z In high temperature mode, the battery pack is discharging to a level of 80%

mal temperature mode.(

⇒Reference Manual “Battery Power”) Do not remove the 

battery pack while the battery indicator is blinking green, or the power will be turned 
off forcibly.

*1

Only for the main battery pack.

*2

A level of 80% in normal temperature mode is displayed as [100%] in high temperature mode.

„ Display