Panasonic KX-PS8000 User Manual

ADF is busy!

To scan or prescan, click RETRY on the
message window.
To cancel, click CANCEL on the message
window.

ADF is being used.

Help file is not found

Help file is not found.

File Not Found

Memory Allocation Error!

Path Not Found

Memory is insufficient.

File or Path is not found.

Close the application which controls the
scanner, turn off the system
(scanner/printer/computer), then turn on
again.

Reinstall the KX-PS8000 software.

File or Path is not found.

Reinstall the KX-PS8000 software.

Close the application which controls the
scanner, turn off the system
(scanner/printer/computer), then turn it on
again.

File open error!!

Failed to load the data of the
gamma correction.

Gamma data read error!!

File write error!!

Failed to transfer the file for
scanning.

Increase the hard disk space, then re-
scan.

Reinstall the KX-PS8000 software.

Click Yes or No on the message window.
Yes: Makes the width of the scan area

smaller, so that it can be scanned.

No: The width of the scan area remains

the same. Decrease the scanning
resolution, then re-scan.

The width of the scan area is too
large.

Horizontal scan area is
too big. Would you like to
change the horizontal
scan size?

Pcom95.dll internal error has
occurred.

PCOM95. DLL Function
Error!!

PCom95.DLL was not
found!!

The file Pcom95.dll is not found.

PCOM31. DLL Function
Error!!

Pcom31.dll internal error has
occurred.

PCom31.DLL was not
found!!

The file Pcom31.dll is not found.

No ASPI managers are
loaded. This typically
occurs when a DOS ASPI
manager is not resident in
memory.

SCSI board is not correctly set.

Correctly set the SCSI board in the
computer. (Refer to the
instructions/manual of the SCSI board.)
For any other trouble related to SCSI,
refer to the SCSI section of
Troubleshooting 

( 

☞ P. 163)

.