Panasonic KX-TDE100 User Manual

Installation Manual

243

If the PBX does not operate properly, use the Reset Button. Before using the Reset Button, try the system 
feature again to confirm whether there definitely is a problem or not.

In order to avoid possible corruption of data on the SD Memory Card, please ensure that the "SD 
ACCESS" LED is off before pressing the Reset Button.

•

When the System Initialise Switch is set to "NORMAL", pressing the Reset Button causes the 
following:

–

Camp-on is cleared.

–

Calls on hold are terminated.

–

Calls on exclusive hold are terminated.

–

Calls in progress are terminated.

–

Call park is cleared.

Other data stored in memory, except the above, are not cleared.

•

Be aware that pressing the Reset Button with the System Initialise Switch in the "SYSTEM 
INITIALIZE" position clears all data stored in the PBX. Do not perform this operation unless you 
intend to delete all data from the PBX.

If the PBX does not operate properly:

Slide the System Initialise Switch to the "NORMAL" position.

Press the Reset Button for about 1 second.

RUN Indicator

LED

Reset Button

System Initialise Switch