Panasonic kx-tg5471s User Manual

1. Enter a phone number.

• If you misdial, press the soft key 

(

). Enter the correct phone 

number.

• If a pause is required when dialing, 

press the soft key (

) where 

needed (p. 50).

• To cancel, press [OFF].

2. Press [C] or [s].
3. To hang up, press [OFF] or place 

the handset on the base unit.

There are 3 volume levels for the 
receiver and 6 volume levels for the 
speaker.

To increase volume, press [B]. 
To decrease volume, press [d].

• The display shows the current volume 

setting.

• If you try to increase/decrease volume 

when it is at the maximum/minimum 
level, the handset will beep 3 times.

Press [C] or [s], then press 
[REDIAL].

The last 5 phone numbers dialed are 
stored in the redial list.

1. Press [REDIAL].

• The last number dialed is displayed.

2. Scroll to the desired number by 

pressing [d] or [B].

• You can also scroll down through 

the list by pressing [REDIAL].

• To exit the list, press [OFF].

3. Press [C] or [s].

• To erase an item, scroll to the item 

then press the soft key (

).

• If “No items stored” is displayed, 

the list is empty.

1. Press [HOLD/INTERCOM] 

during a conversation.

• “Press extension# to 

transfer” is displayed.

• To transfer the call to the base unit, 

see page 47; to transfer to a 
mailbox, see page 64.

2. Press [HOLD/INTERCOM] again.

• “Hold” is displayed.

To return to the call, press [C] or 
[s].

• The base unit user can also take the 

call by pressing [SP-PHONE]. 

• If another phone is connected on the 

same line (p. 11), you can also take 
the call by lifting its handset.

• If a call is kept on hold for 6 minutes, 

an alarm tone will start to sound and 
the Ringer/Message Alert indicator will 
start to flash rapidly. After 4 additional 
minutes on hold, the call will be 
disconnected.

3334444

|

Volume

 Low 

 High

dB

Ex. Receiver volume: High

Speaker volume: Level 6

TG5471.fm  Page 28  Monday, December 20, 2004  5:21 PM