Panasonic wv-cu360 User Manual
21
The
VTR/CAM
indicator lights up. The playback picture
appears on the monitor.
Note:
If the playback channel number etc. is not recog-
nized in winding the cassette fast forward or
rewinding it, the
rewinding it, the
VTR/CAM
indicator blinks.
3. To cancel the playback function, press the
VTR/CAM
button again. The
VTR/CAM
indicator goes off. The
camera picture appears on the screen.
Note:
To manually change playback pictures, set the
PLAYBACK AUTO ON in Setup menu of the system
unit to OFF.
unit to OFF.
●
Sequence Function
The following function is available only in cases where a
system unit with the sequence function and sequence
pause function is connected.
system unit with the sequence function and sequence
pause function is connected.
1. Select the desired system unit and monitor.
2. Press the
SEQUENCE/PATROL STOP
button.
The
SEQUENCE
indicator lights up.
VTR CAM
5. To cancel the electronic zoom control, press the
EL-
ZOOM/+
button again. The
EL-ZOOM/+
indicator goes
off.
●
Displaying the Playback
The following function is available only in cases where a
system unit with the playback function is connected.
system unit with the playback function is connected.
1. Select the desired system unit and monitor.
2. Press the
VTR/CAM
button.
3. To pause the sequence, press the
SEQ PAUSE/SLOW
button.
SEQUENCE
PATROL
STOP
SEQ PAUSE
SLOW
5. To move the sequence one step backward, press the
STILL/–
button.
STILL
–
3. Press the
SETUP/FUNCTION
button after pressing the
SHIFT
button.
The system function corresponding to the entered num-
ber is controlled.
ber is controlled.
MON
CAM
LOGOUT
ESC
SET
SHIFT
6. To cancel the sequence pause, press the
SEQUENCE/
PATROL STOP
button.
7. To cancel the sequence, select the desired camera.
Note:
Procedures 3-5 apply only to system units with
the sequence pause function.
●
System Function Control
The following function is available in cases where a system
unit capable of system function control with numeric but-
tons is connected. For further information, refer to the
Operating Instructions for the system unit used.
unit capable of system function control with numeric but-
tons is connected. For further information, refer to the
Operating Instructions for the system unit used.
1. Select the desired system unit and monitor.
2. Select a system function number using numeric but-
tons.
FUNCTION
SETUP
EL-ZOOM
+
4. To move the sequence one step forward, press the
EL-
ZOOM/+
button.