Yamaha cd-r1000 User Manual

Rear Panel

A

Cooling fan
The cooling fan keeps the internal components cool. See “Installation” on page 1 for 
more information.

B

AC IN connector
This connector is used to connect the CDR1000 to an AC outlet, using the supplied 
power cord. See “Connecting the Power Cord” on page 16 for more information.

C

ANALOG OUT connectors
These balanced male XLR-3-32 type 
connectors output analog playback and 
monitor signals. They are wired pin 
1–ground, pin 2–hot (+), and pin 
3–cold (–).

D

ANALOG IN connectors
These balanced female XLR-3-31 type 
connectors are used to connect analog 
input signals. They are wired pin 
1–ground, pin 2–hot (+), and pin 
3–cold (–). See “Selecting the Input 
Source” on page 25 for more informa-
tion.

If you need to connect the balanced ANALOG IN or ANALOG OUT to unbalanced 
equipment, using phone or phono connectors, link XLR pins 1 and 3, as shown in the 
following illustration for an unbalanced phone-plug to female XLR cable.

E

ANALOG IN level switch
This switch is used to set the input sensitivity of the ANALOG IN connectors to either 
+4 dB or –10 dBV.

1

3

4

5

6

7 8

9

J

K

2

Male XLR connector

1 (ground)

3 (cold)

2 (hot)

Female XLR connector

1 (ground)

3 (cold)

2 (hot)

Female XLR plug

1 (ground)

3 (cold)

2 (hot)

1/4"  phone plug

Tip (hot)

Sleeve (ground)