Yamaha cd-r1000 User Manual

Page of 67
Recording
29
CDR1000—Owner’s Manual
Recording
This section explains how to record.
The following illustration shows the procedure for recording.
1
2
From stop, press the [REC] button to engage Record Standby mode.
Record Standby mode is engaged, the PAUSE indicator lights up, and the REC indica-
tors flash. If the loaded disc is a blank disc, track 1 is selected for recording. If it’s a par-
tially recorded disc, the next available track is selected.
The time counter can be set to display the elapsed record time, remaining record time, 
or total record time. See “Setting the Time Display” on page 19 for more information.
In Record Standby mode, the selected input source can be monitored via the ANALOG 
OUT, AES/EBU OUT, COAXIAL OUT, or PHONES, and metered on the CDR1000 
level meters.
You can cancel Record Standby mode by pressing the [STOP] button.
3
If recording via the ANALOG IN, use the REC LEVEL control to set the recording 
level in conjunction with the level meters.
The recording level can be set independently for the left and right channels. The record-
ing level for the AES/EBU IN and COAXIAL IN is determined by the source and cannot 
be set on the CDR1000.
A two-second mute can be inserted at the beginning of a track by using the Rec Mute 
function. See “Inserting a Two-second Mute” on page 35 for more information.
4
Press the [PLAY] or [PAUSE] button to start recording.
Recording starts, the PAUSE indicator goes out, the REC indicators light up continu-
ously, the PLAY indicators light up, and the time counter starts counting. If the Fade In 
function is set, fade in processing is performed. See “Applying a Fade In” on page 37 for 
more information.
Recording can also be started by using an optional footswitch. See “Using a Footswitch” 
on page 50 for more information.
Record Standby mode
Recording starts
Tn=1
Tn=2
PAUSE
PLAY
Record
Standby
mode
REC
STOP
(Recording can also be
started by pressing the
[PAUSE] button or
footswitch)
Recording stops
Press the [PAUSE] button again
1
2