Yamaha HTR-5930 User Manual

Press d to confirm your selection and then 
press j / i to select the number of speakers 
connected to this unit.

Press d to confirm your selection.

“iSET  CANCEL” appears in front panel display.

Press j / i to select the desired setting.

Choices: SET, CANCEL
• Select “SET” to apply the settings you made.
• Select “CANCEL” to cancel the setup procedure 

without making any changes.

y

You can also press SET MENU repeatedly to cancel the 
setup procedure.

Press d to confirm your selection.

If you selected “SET” in the previous step, you will 
hear a test tone from each speaker in turn. 
“CHECK:TestTone” appears in the front panel 
display for a few seconds and then “CHECK OK?” 
appears in the front panel display.

y

The indicator of the speaker currently outputting the test 
tone flashes in the front panel display.

Press j / i to select the desired setting.

Choices: YES, NO
• Select “YES” to complete the setup procedure if 

the test tone levels from each speaker were 
satisfactory.

• Select “NO” to proceed to the speaker level 

adjustment menu to balance the output level of 
each speaker.

Press d to confirm your selection.

• If you selected “YES” in the previous step, the 

setup procedure is completed and the display 
returns to the “BASIC MENU”.

• If you selected “NO” in the previous step, the 

speaker level adjustment display appears in the 
front panel display.

2spk

Front L/R

3spk

Front L/R, Center

4spk

Front L/R, Surround L/R

Front L/R, Center, Surround L/R