Yamaha HTR-5930 User Manual

The “BASIC MENU” feature is a useful way to set up 
your system quickly and with minimal effort.

y

• If you wish to configure this unit manually using more precise 

adjustments, use the detailed parameters in “SOUND MENU” 
(see page 53).

• Altering any parameters in “SETUP” resets all parameters 

manually adjusted in “SOUND MENU” (see page 53).

• Initial settings are indicated in bold under each parameter.

Before you begin:
• Press SPEAKERS on the front panel repeatedly (or press 

SPEAKERS A/B on the remote control) to select the front 
speakers you want to use.

• Make sure you disconnect your headphones from this unit.

“BASIC MENU” appears in the front panel display.
If the front panel display shows anything other than 
“BASIC MENU”, press SET MENU repeatedly until 
“BASIC MENU” appears.

Press i to enter “BASIC MENU”.

“1 SETUP” appears in the front panel display.

Press i to enter “1 SETUP”.

“ROOM” appears in the front panel display.

Press j / i to select the desired setting.

Select the size of the room where you have installed 
your speakers. In general, the room sizes are defined 
as follows:

Choices: S, M, L
[U.S.A. and Canada models]
S (small)

16 x 13 ft, 200 ft

2

 (4.8 x 4.0 m, 20 m

2

)

M (medium) 20 x 16 ft, 300 ft

2

 (6.3 x 5.0 m, 30 m

2

)

L (large)

26 x 19 ft, 450 ft

2

 (7.9 x 5.8 m, 45 m

2

)

[Other models]
S (small)

3.6 x 2.8 m, 10 m

2

M (medium) 4.8 x 4.0 m, 20 m

2

L (large)

6.3 x 5.0 m, 30 m

2

Press d to enter “SUBWOOFER” and then 
press j / i to select the desired setting.

Choices: YES, NONE
• Select “YES” if you have a subwoofer in your 

system.

• Select “NONE” if you do not have a subwoofer in 

your system.