Epson FX-880 User Manual
1. Make sure the Tear Off/Bin light is flashing (the paper is at
the current tear-off position). You may need to press the
Tear Off/Bin button to advance the paper to the tear-off
position.
Tear Off/Bin button to advance the paper to the tear-off
position.
2. Hold down the Pause button for about three seconds.
The Pause light begins flashing and the printer enters
the micro adjust mode.
the micro adjust mode.
3. Press the LF/FF
D
button to feed paper backward, or press
the Load/Eject
U
button to feed paper forward, until
the paper perforation is aligned with the tear-off edge of the
printer cover.
printer cover.
fx3-22-1
tear-off edge of
the printer cover
the printer cover
fx3-22-2
3
R
Gentian-W
Rev.C
A5 size
Chapter 3
11/17/97
pass 1
Printing on Continuous Paper
3-39