Epson FX-880 User Manual
Advancing paper to the tear-off position automatically
To automatically advance your printed documents to the
tear-off position, turn on the auto tear-off mode and select the
appropriate page length for continuous paper in the default
setting mode. When auto tear-off is on, the printer
automatically advances the paper to the tear-off position
whenever it receives a full page of data or a form feed
command followed by no more data. To enter the default-
setting mode, see “Making Default Settings” on page 5-3.
tear-off position, turn on the auto tear-off mode and select the
appropriate page length for continuous paper in the default
setting mode. When auto tear-off is on, the printer
automatically advances the paper to the tear-off position
whenever it receives a full page of data or a form feed
command followed by no more data. To enter the default-
setting mode, see “Making Default Settings” on page 5-3.
Adjusting the tear-off position
If your paper’s perforation is not aligned with the tear-off edge,
you can use the micro adjust feature to move the perforation to
the tear-off position. Follow the steps below.
you can use the micro adjust feature to move the perforation to
the tear-off position. Follow the steps below.
c
Caution:
Never use the knob to adjust the tear-off position; this may damage
the printer or cause it to lose the tear-off position.
Never use the knob to adjust the tear-off position; this may damage
the printer or cause it to lose the tear-off position.
Note:
Your tear-off position setting remains in effect until you change it, even if
you turn off the printer.
Your tear-off position setting remains in effect until you change it, even if
you turn off the printer.
L
Gentian-W
Rev.C
A5 size
Chapter 3
11/17/97
pass 1
3-38
Printing on Continuous Paper