Tektronix AFG3000 User Manual
Reference
AFG3000 Series Arbitrary/Function Generators Reference Manual
2-5
Arb Menu
The arbitrary/function generator can output a user-defined waveform that is stored
in the internal memory, Edit Memory, or a USB memory. Table 2-4 shows the Arb
menu.
in the internal memory, Edit Memory, or a USB memory. Table 2-4 shows the Arb
menu.
To output a user-defined waveform, you have two options:
Output the contents of Edit Memory
Output one of user-defined waveforms stored in the internal or in a USB
memory
memory
To output a user-defined waveform, you must first save the file in the internal or
USB memory. You can save up to four user-defined waveforms in the internal
waveform memory. Waveform data in the Edit Memory can also be output, but the
contents of Edit Memory is deleted when the instrument power is turned off.
USB memory. You can save up to four user-defined waveforms in the internal
waveform memory. Waveform data in the Edit Memory can also be output, but the
contents of Edit Memory is deleted when the instrument power is turned off.
Table 2-4: Arb Menu
First Level
Second Level
Description
Arb Waveform Menu
Memory
Internal
USB
USB
Selects a memory type. (Internal or USB)
Refer to page 2-28 for file operations.
Refer to page 2-28 for file operations.
(blank)
Change Directory
Change Directory
Opens a directory in a USB memory.
OK
Cancel
Cancel
Frequency/Period/
Phase Menu
Phase Menu
Refer to Table 2-1
Amplitude/Level Menu
Refer to Table 2-1
Run Mode Menu
Continuous
–––
Modulation
Sweep
Refer to Table 2-7
Burst
Output Menu
Refer to Table 2-9
NOTE.
When the arbitrary/function generator outputs an Arb waveform, the
peak-to-peak voltage of the measurement result is the same as the setup value if the
waveform data is normalized.
waveform data is normalized.