SMART Technologies board d600 User Manual

CHAPTER 2 – INSTALLING AND SECURING YOUR SMART BOARD 
INTERACTIVE WHITEBOARD

5. Route the modular I²C cable through the cable 

management channel under the lower-right end 
of the pen tray, and then insert its connector 
into receptacle 1. 

6. Press the cable into the cable management 

channel on the bottom of the tray. This step 
protects the modular cable’s RJ11 connector 
from damage if the pen tray is removed without 
first disconnecting the cable.

7. Place the four pens and the eraser into their 

respective slots in the pen tray.

Securing the Pen Tray and 
Interactive Whiteboard

Because your SMART Board interactive whiteboard’s pen tray is detachable, you 
might want to safeguard it—and your interactive whiteboard—by anchoring it with a 
security cable.

NOTE
Securing the pen tray can provide theft deterrence for your interactive whiteboard 
because the screws that secure your interactive whiteboard to the wall are located 
directly behind the pen tray, and must be removed to detach the pen tray. In effect, 
when you secure the pen tray, you’re also securing your interactive whiteboard 
if the security cable is tight.

Locking the Pen Tray to Your Interactive Whiteboard

Underneath the pen tray, you’ll find a lock slot that accommodates a security cable, 
such as a Kensington® lock.