Adam Equipment azplus 15 User Manual

4.7 Kg/100g KEY, PRICE PER KILOGRAM, PRICE PER 100g

The [kg 100g] key will change the scale from using a price per kilogram to price per 100g.

It will also change the arrows under the Unit Price display to show the selection.

This information is also saved for the PLU values that are stored in the memory.

NOTE:

This is not applicable for AZ

plus for South Africa and Far East.

The current software revision number is 1.61. For all revisions from 1.27 and

above, the Price per kilogram and per 100 gram key can be disabled at the factory

for the scales to be used in South Africa and Far East. This is done by linking the

jumper at K5 position on the PCB.

4.8 AUTO

SLEEP

FUNCTION

This function may be enabled or disabled by the user. If enabled, when the scale is not

used for some time (as pre-set by the user under this function) it automatically switches

off. To set this parameter,

• During self-checking, press [kg 100g] and release at once. The display

shows “

SLEEP nodE”.

• Press

[PLU4] key to scroll through the auto sleep values.

“

0”

Auto sleep mode disabled

“

1” Auto sleep after 1 minute

“

5”

Auto sleep after 5 minutes

“

30” Auto sleep after 30 minutes

• Press

[Tare] to set the value. The scale returns to zero.

NOTE: For AZ

plus for South Africa and Far East, press the [Zero] key to enter Auto Sleep

function.