Adam Equipment azplus 15 User Manual
© Adam Equipment Company 2007
14
4.9 BACKLIGHT OPERATION
The backlight may be enabled or disabled by the user. If the backlight is disabled battery
life will be maximised.
With the backlight in operation the battery life will be less, depending upon the extent at
which the scale has been used.
To enable the backlight
Press and hold the [Auto Clear] key for 4 seconds.
Press the [PLU4] key to change the operation:
“
EL
” “
AU
”
Automatic control of the backlight
“
EL
” “
on
”
Backlight on full time
“
EL
” “
oFF
”
Backlight turned off.
Press [Tare] to store the setting.
To disable the backlight
Press the [Zero] key.
Then quickly press [5] while the weight display shows dashes.
Backlight operation
When the backlight is set to automatic control, it will only turn on when the scale is
being used.
It will be on when a weight is on the platform or when a key is pressed.
It will turn off automatically after a few seconds when the weight is zero or after a
while the last key was pressed.