Adam Equipment azplus 15 User Manual

 

The scales are sealed to prevent unauthorised calibration.  
 

Contact Adam Equipment or your supplier for more details. 

 

 

 

The calibration of the AZ

plus scale is 

accomplished by removing the label at 

the base of the scale which covers a hole 

through which the PCB can be accessed. 

If your scale is not provided with this 

hole, you need to break the security 

seals and remove the top cover to gain 

access to the circuit boards inside. See 

the figure on the security seal below. 

 

WARNING: CALIBRATION OF THE SCALES MAY MAKE IT ILLEGAL TO 
USE THE SCALES FOR SALES OF GOODS. CONTACT YOUR TRADING 
STANDARDS OFFICE FOR FURTHER ASSISTANCE. 

 

 

To seal the scale a lead-wire seal can be 

used as shown below. The base has a 

metal pin that protrudes through the 

cover. The security seal may be threaded 

through this metal pin, making it 

impossible to remove the cover without 

damaging either the security seal or the 

enclosure. 

 

Metrology labels and additional security 

measures may be added to the scale as 

required by the national legislation. 

 

 

© Adam Equipment Company 2007 

15