PAC swi-ps User Manual

06-14-07

Release the button.

The LED will turn on 

back on. 

If you need to program more buttons, 

repeat step 20 for each additional audio 

function on the steering wheel.

Once programming 

is completed, wait 7 

seconds. The LED will 

flash three times indi-

cating end of program-

ming. The Interface will 

then flash the version 

number it was pro-

grammed for.

Within 7 seconds, press and 

hold the button that is to be 

learned on the steering wheel.

The LED will turn off 

when the button has 

been learned.

After all buttons are 

programmed

Program 

remaining buttons

VOL

VOL

1. Volume Up

2. Volume Down

3. Mute

4. Track Up/Seek Up

5. Track Down/Seek Down

6. Source

7. Preset Up/Disc Up

8. Preset Down/Disc Down

9. Band

The SWI-PS must be programmed in the specific order shown below. If a function is not needed, it may be skipped.

Within 7 seconds, 

press and release the 

programming/mode 

button on the SWI-PS.

The LED will flash 

once and stay on. 

This will indicate 

that the function 

has been skipped.

A. If the current function above is what you 

need to program, proceed to step 21.

B. If the current function above is not needed, 

proceed to step 23

Example: If you have a vehicle with only 3 functions, and you want to program Volume Up, Volume Down and Source. You will do 

Step 21-22 twice, the first time for Volume Up, the second time for Volume Down. Step 23 will be done 3 times to skip 

Mute, Track Up and Track Down. Do Step 21-22 to program Source. After all 3 buttons have been programmed, you will 

proceed to Step 24.