Fujitsu sparc m3000 User Manual

2-6

C120-E360-06EN

CHAPTER 2  Setup of the RCI for Operation 

RCI setup for addition of an RCI host contains the following steps:

1

2

3

4

Before connecting an RCI cable to an RCI host, confirm that RCI settings have been 
initialized.

• To confirm RCI initialization: 

1

Execute the setrci (8) command to display the RCI status.

 

Confirm that "address" is 000f7fff (initial address value).
If RCI settings have not been initialized, perform the next step.

2

Execute the setrci (8) command to initialize RCI settings.

Connect an RCI cable to the RCI host to be added.

1

Insert a T-branch connector and an RCI cable into the existing set of connections 
of RCI cables.

XSCF> setrci -c stat
HOST
 address 000f7fff
 Inactive
The command completed successfully.

XSCF> setrci -c init
The command completed successfully.