Konica Minolta dimage z5 User Manual

Windows 98 and 98 Second Edition

1. Turn off the camera.
2. Change the memory card.
3. Turn on the camera to remake the USB connection.

Windows Me, 2000 Professional, and XP

Macintosh

1. Stop the USB connection using the unplug-or-eject-hardware routine (p. 110).
2. Turn off the camera.
3. Change the memory card.
4. Turn on the camera to remake the USB connection.

1. Stop the USB connection by dragging the drive icon into the trash (p. 111).
2. Turn off the camera.
3. Change the memory card.
4. Turn on the camera to remake the USB connection.

Never remove the card when the access lamp is red - the data

or memory card may permanently be damaged.

1. Insert a memory card in the camera and connect it to the computer with the USB cable. Other

devices must not be connected to the computer during this procedure.

2. Right click on the My-computer icon. Select “properties” from the drop-down menu.

Windows XP: from the start menu go to the control panel. Click on the performance and mainte-
nance category. Click “System” to open the system properties window.

3. Windows 2000 and XP: select the hardware tab in the properties window and click the device-

manager button.

Windows 98 and Me: click the device-manager tab in the properties window.

4. The driver file will be located in the universal-serial-bus-controller or other-devices location of the

device manager. Click on the locations to display the files. The driver should be indicated with
Konica Minolta, the camera name, or “USB Mass Storage Device.” Under certain conditions, the
driver name may be different. However, the driver will be indicated by either a question mark or
exclamation point.

5. Click on the driver to select it.

6. Windows 2000 and XP: click on the action button to display the drop-down menu. Select “unin-

stall.” A confirmation screen will appear. Clicking “Yes” will remove the driver from the system.

Windows 98 and Me: click the remove button. A confirmation screen will appear. Clicking “Yes”
will remove the driver from the system.

7. Disconnect the USB cable and turn off the camera. Restart the computer.