Konica Minolta dimage z5 User Manual

Confirm the transfer-mode option in section 4 of the setup menu is set
to PictBridge. Connect the camera to a PictBridge compatible printer
using the camera’s USB cable. The larger plug on the cable is con-
nected to the printer. Open the AV out/ USB port cover and insert the
smaller plug of the cable into the camera. Turn the camera on; the
PictBridge screen is displayed automatically. 

Individual still images can be selected for printing on the PictBridge
screen. For other printing options, see the menu navigation section on
page 110.

The information (i

+

) button switches between the single frame and

index playback formats on the PictBridge screen. Enlarged playback, activated with the zoom lever,
can be used to examine image files on the screen.

Use the left/right keys of the controller to display
the image to be printed.

Total number of prints

Number of copies

Press the up key to select the number of copies
to be printed. To deselect an image for printing,
press the down key until the number of copies
reaches zero.

Repeat the previous steps until all the images to be printed are selected. Press the cen-
tral button of the controller to continue.

The number of prints in the print run are displayed as well as the
print parameters selected with the menu. See the menu navigation
section for more information (p. 116). Press the central button of
the controller to begin printing, or press the menu button to return
to the PictBridge screen. A maximum number of fifty images can
be printed.

Once printing begins, the operation can be canceled by pressing the
center of the controller. When printing run is finished, a message indi-
cates the end of the operation; press the center of the controller and turn
the camera off to end the routine.

If the battery is exhausted before the print run is complete, printing is canceled. Use a fully-charged
battery or the optional AC adapter.

If a minor problem occurs during printing, such as the paper runs out, follow the procedure recom-
mended for the printer; no action is required for the camera. If a major printer error occurs, press
the center of the controller to end the routine. Refer to the printer manual for the correct procedure
for the printer problem. Check the printer settings before starting again and deselect the images
that were printed.

O

OKK