Nilfisk neptune e User Manual

4

english

1)

Accessories / model variants

NEPTUNE E

The high-pressure cleaner 
should  only be used by author-
ized persons who have been 
instructed in its use.

Although extremely easy to 
operate, children should not be 
allowed to use the cleaner.

Use of the high-pressure cleaner 
is subject to the applicable local 
regulations.
Besides the operating instruc-
tions and the binding accident 
prevention regulations valid in 
the country of use, observe rec-
ognized regulations for safety 
and proper use.
Do not use any unsafe work 
techniques.

Use only detergents approved 
by Nilfisk-Alto.

Transport of the high-pressure 
cleaner is easy on its large 
wheels. 

For safe transport in and on ve-
hicles we recommend preventing 
the equipment from sliding and 
tilting. Secure it with tie-downs 
and apply the parking brake on 
the castor wheel.

For transport at temperatures 
around or below freezing 0°C 
(32°F), anti-freeze should be 
drawn into the pump beforehand 
(see chapter 6). 

Before use, check that the high-
pressure cleaner is safe and in 
proper condition. 
Regularly check whether the 
power cord is damaged or shows 
signs of ageing. 

Use the high-pressure cleaner 
only when the power cord is in 
a safe condition. (risk of electric 
shock using damaged cord!).

Check the rated voltage of the 
high-pressure cleaner before 
connecting it to the mains power 
supply. Ensure that the voltage 
shown on the rating plate cor-
responds to the voltage of the 
power supply.
We strongly recommend that the 
power supply to the high pres-
sure cleaner be connected via a 
residual current circuit breaker. 
This device stops the supply of 
electricity if the leakage current 
to the ground exceeds 30 mA for 
30 ms or it has an ground tester 
circuit.

Please observe the regulations 
and provisions applicable in your 
area. Before putting the high-
pressure cleaner into service, 
carry out a visual check of all 
the major components.

Before using the 

h i g h - p r e s s u r e 
cleaner, be sure 
to also read the 

enclosed operat-

i n g   i n s t r u c t i o n s 

and keep them within reach at 
all times.

Safety instructions 

in these operating 

instructions which 

must be observed 

to prevent risks 

to persons are marked with this 
danger symbol.

This symbol is used to 

mark safety instruc-

tions that must be 

observed to prevent 

damage to the machine 

and its performance.

T h i s   i n d i -
c a t e s   t i p s 

and instructions 

to simplify work 

a n d 

to ensure safe opera-

tion.

O p e r a t i o n s 

marked with this 
symbol should 
only be carried 

o u t   by   N i l f i s k -

A l t o   S e r v i c e 

Technicians.