Konica Minolta cn3101e um 1.1.0 User Manual
Settings Required for Local Connection
3
CN3101e
3-1
3
Settings Required for Local
Connection
Connection
To make a local connection between the PC and printer controller, make
the settings by following the procedures given below.
the settings by following the procedures given below.
3.1
Installing the Printer Driver
For Windows 98, 98SE, Me, 2000, NT 4.0 and XP:
NOTE
è
To connect the copier to a PC, in which Windows 98, 98SE, or Me is
installed, through the USB, it is necessary that the USB device driver
be installed in the PC.
For the procedure to install the USB device driver, see “ Connecting
the USB Cable” on page 3-3.
installed, through the USB, it is necessary that the USB device driver
be installed in the PC.
For the procedure to install the USB device driver, see “ Connecting
the USB Cable” on page 3-3.
1
Click the “Start” button and, from the menu that will then appear,
select “Settings” – “Printers.”
select “Settings” – “Printers.”
2
The Printers window will appear.
Double-click the “Add Printer” icon in the window.
Double-click the “Add Printer” icon in the window.
3
The “Add Printer Wizard” by Microsoft Windows will start.
Follow the instructions and make your choices. After the installation
is complete, the corresponding icon will be added to the "printers"
window.
Follow the instructions and make your choices. After the installation
is complete, the corresponding icon will be added to the "printers"
window.
3.2
Installation through Plug and Play
If the local connection (IEEE1284 or USB) is made between the PC and
the copier, the printer driver can be installed through the “Plug and Play”
function.
the copier, the printer driver can be installed through the “Plug and Play”
function.