Konica Minolta cn3101e um 1.1.0 User Manual
3
Settings Required for Local Connection
3-2
CN3101e
For details of how to install the printer driver, see “3. Setting Required for
Local Connection.” “3 Settings Required for Local Connection” on page
3-1.
Local Connection.” “3 Settings Required for Local Connection” on page
3-1.
NOTE
è
Windows NT 4.0 does not support “Plug and Play.”
Connecting the IEEE1284 (Centronics) Cable
1
Make the connection after the copier and PC have been turned OFF.
2
Plug one end of the cable into the printer controller and fix the lock
springs on both sides of the connector.
springs on both sides of the connector.
3
Connect the other end of the cable to the PC.
4
The copier and PC are turned ON in that order.
Windows is started, the installation guide for the printer driver through
Plug and Play is automatically started on the PC.
Windows is started, the installation guide for the printer driver through
Plug and Play is automatically started on the PC.
5
Install the printer driver according as instructed by the “Add New
Hardware Wizard.”
Hardware Wizard.”