Konica Minolta cn3101e um 1.1.0 User Manual
Settings Required for Local Connection
3
CN3101e
3-3
Connecting the USB Cable
l Windows 98, 98SE and Me:
Following the instructions given in the “Add New Hardware Wizard”
that will be automatically started through Plug and Play, install the
USB device driver and then install the printer driver.
that will be automatically started through Plug and Play, install the
USB device driver and then install the printer driver.
1
Connect the USB cable to the copier and PC with the Power Switch
ON.
ON.
2
The installation of the printer driver through Plug and Play is
automatically started on the PC.
automatically started on the PC.
3
Install the USB device driver according as instructed by the “Add New
Hardware Wizard.”
Hardware Wizard.”
NOTE
è
The USB device driver is stored in the printer driver CD-ROM.
4
Following the instructions given in the “Add New Hardware Wizard”
that will automatically appear after the USB device driver has been
installed, install the printer driver.
that will automatically appear after the USB device driver has been
installed, install the printer driver.
l Windows 2000 and XP:
1
Connect the USB cable to the copier and PC with the Power Switch
ON.
ON.
2
The installation of the printer driver through Plug and Play is
automatically started on the PC.
automatically started on the PC.
3
Install the printer driver according as instructed by the “Add New
Hardware Wizard.”
Hardware Wizard.”
NOTE
è
Windows NT 4.0 does not support USB.