Konica Minolta micropress release 6 User Manual
53
tray if this feature is supported for the engine.
Device
Device tab is used to make various settings for the PrintStation.
To display Device Status information:
1 Click PrintStation button.
2 Click Device tab.
2 Click Device tab.
Settings
Printer Settings dialog is used to view and change various settings for the PrintStation.
To display Printer Settings information:
1 Click PrintStation button.
2 Click Settings tab.
2 Click Settings tab.
Field/Control
Description
Feed Tray Status
Displays media levels, sizes and types for all input trays. Media Size for the MBT and
Media Type for all input trays can be set here.
Media Type for all input trays can be set here.
Destination Tray Status
Displays the status of the output, or Destination, trays.
Tray Settings
• Separators from: – indicates which tray job or copy separators will be pulled from.
• Empty Tray Switch Skips: – From the drop-down list, select the paper source to skip if one
• Empty Tray Switch Skips: – From the drop-down list, select the paper source to skip if one
paper tray runs out of paper during printing.
Field/Control
Description
Engine Settings
• Error Timeout – Amount of time PrintStation waits before moving the job to another Print-
Station.
• Separators From – Sets correct paper source to pull separator paper from.
• MOP Limit – Multiple Original Prints (MOP) allows multiple copies of a job to be printed
• MOP Limit – Multiple Original Prints (MOP) allows multiple copies of a job to be printed
through the PSM at the printer’s rated speed. Rather than sending the job from the PSM
multiple times to be decompressed and processed for each copy, the job is sent once. The
job is then decompressed and saved to disk by the engine. Once the specified number of
copies have been printed, the file saved to disk is deleted. The limit number determines
the point at which MOP is turned off. In other words, with the number set at 300, jobs from
1 to 300 pages will be processed as described above. Jobs from 301 pages and greater
will be sent by the PSM to the engine for each copy of the job.
multiple times to be decompressed and processed for each copy, the job is sent once. The
job is then decompressed and saved to disk by the engine. Once the specified number of
copies have been printed, the file saved to disk is deleted. The limit number determines
the point at which MOP is turned off. In other words, with the number set at 300, jobs from
1 to 300 pages will be processed as described above. Jobs from 301 pages and greater
will be sent by the PSM to the engine for each copy of the job.
• Sleep Timer – Time period from the last printed page until the PrintStation/PrintLink goes
to “sleep” (low power mode). Printer automatically wakes when a new job arrives.
• Error On Toner Low – Selecting this option causes engine to stop printing when the toner
is empty rather than displaying a warning and continuing to print.
Field/Control
Description
Error Timeout
Amount of time PrintStation waits before moving the job to another PrintStation.
Error on Toner Low
Selecting this option causes engine to stop printing when the toner is empty rather than
displaying a warning and continuing to print.
displaying a warning and continuing to print.
Separators from
Sets correct paper source from which to pull separator paper.
Empty Tray Switch Skips
From the drop-down list, select the paper source to skip if one paper tray runs out of paper
during printing.
during printing.
Density
Current density setting of the PrintStation.
Sleep Timer
Time period from the last printed page until the PrintStation/PrintLink goes to “sleep” (low
power mode). Printer automatically wakes when a new job arrives.
power mode). Printer automatically wakes when a new job arrives.
Gamma Calibration
Click the Gamma Calibration button to display a dialog that shows the current gamma file or
load another file.
load another file.