Nuance omniform filler 4 User Manual
Scanning Graphics into OmniForm Filler
64
Chapter 4
Scanning Graphics into OmniForm Filler
This section describes common scanning problems that may occur if you
use a scanner to import a graphic into a fill graphic field:
use a scanner to import a graphic into a fill graphic field:
System Hang During Scan
A system hang during a scan could have several possible causes:
• An interrupt conflict between your scanner and another device
such as a bus mouse or network card.
Check interrupt addresses for a possible conflict. See your device
documentation.
Check interrupt addresses for a possible conflict. See your device
documentation.
• A SCSI termination problem.
Make sure the scanner is terminated properly. See your scanner
documentation.
documentation.
• A memory-related problem.
Try closing open windows and applications to free up memory.
Scanner Compatibility
If you experience a problem between OmniForm Filler and your
scanner, make sure your scanner is a TWAIN-compatible scanner, such
as Canon, Epson, or Microtek.
scanner, make sure your scanner is a TWAIN-compatible scanner, such
as Canon, Epson, or Microtek.
Operation
This section provides troubleshooting techniques for potential
operational problems as well as additional technical information:
operational problems as well as additional technical information:
OmniForm Filler Limits
The following limits apply in OmniForm Filler:
• Pages in a form: 100
• Open forms: 20 (depends on your system)
• Records in a database: 10,000 or approximately 5.4 MB of data
across all records.