Panasonic PTLZ370E Operating Guide

You can set the color of the projected image when 

there is no signal input.

1)  Press ▲▼ to select [BACK COLOR].
2)  Press ◀▶ to switch [BACK COLOR].

▶

z

The setting will change as follows each time 

you press the button.

The entire projection area appears 

blue.

The entire projection area appears 

black.

Projects the Panasonic logo.

[USER LOGO] Projects the logo transferred with 

“Logo Transfer Software”

*1

.

*1:  “Logo Transfer Software” is included in the attached CD-

ROM.

This function is used if the whole projected image is 

not displayed when SXGA signal is input.

Set it to [SXGA] normally.

1)  Press ▲▼ to select [SXGA MODE].
2)  Press ◀▶ to switch [SXGA MODE].

▶

z

The setting will change as follows each time 

you press the button.

When [SXGA] is set and the whole 

projected image is displayed

When [SXGA] is set and the whole 

projected image is not displayed

▶

■[AUTO SETUP]

Refer to “Using the Automatic setup function” 

(



 page 40) for details.

▶

■[FREEZE]

You can freeze the projected image and stop 

the sound temporarily, regardless of the playing 

condition of the external device.

To release the setting, press the <RETURN> 

button or the <FREEZE> button on the remote 

control.

▶

■[AV MUTE]

You can stop the projection and the sound when 

you will not be using the projector for a while.

To release the setting, press the <RETURN> 

button or the <AV MUTE> button on the remote 

control.