Manualsbrain.com
  1. Manuals
  2. Brands
  3. Panasonic
  4. PTLZ370E
  5. Operating Guide

Panasonic PTLZ370E Operating Guide

Download
Page of 120
[PROJECTOR SETUP] menu
64 - ENGLISH
Settings
[PROJECTOR SETUP] menu
Select [PROJECTOR SETUP] from the main 
menu, and select the item from the sub-menu.
Refer to “Navigating through the menu” 
(
 page 42) for the operation of the menu 
screen.
 
z
After selecting the item, press ▲▼◀▶ to set.
[STATUS]
You can display the projector status.
1)  Press ▲▼ to select [STATUS].
2)  Press the <ENTER> button.
▶
z
The 
[STATUS] screen is displayed.
[SIGNAL]
[NAME]
Displays the input signal name.
[FREQUENCY] Displays the frequency of the 
input signal.
[RUNTIME]
[PROJECTOR] Displays the operation times of 
the projector.
[LAMP]
Displays the status and the lamp 
actual usage time for each mode.
[SERIAL NUMBER]
[PROJECTOR] Displays the serial number of the 
projector.
Note
 
z
To estimate the lamp replacement timing, check 
the lamp usage time (converted value) displayed 
in [LAMP RUNTIME] (
 page 66) of [PROJECTOR 
SETUP].
 
z
The actual total usage time of [ECO] and [NORMAL] 
may be shorter than the lamp usage time (converted 
value).
[PROJECTOR ID]
The projector has an ID number setting function, and 
simultaneous control or individual control is possible 
with one remote control when multiple projectors are 
used side by side.
1)  Press ▲▼ to select [PROJECTOR ID].
2)  Press the <ENTER> button.
▶
z
The 
[PROJECTOR ID] screen is displayed.
3)  Press ▲▼ to select [PROJECTOR ID].
▶
z
Select one from [ALL], and [1] to [6].
4)  Press the <ENTER> button to set it.
▶
z
[PROJECTOR ID] is set.
Note
 
z
The ID number of the remote control needs to 
be matched with the ID number of the projector 
when the ID number is specified and individually 
controlled.
 
z
When the ID number is set to [ALL], the projector 
will operate regardless of what ID number is 
specified from the remote control or the computer.
If multiple projectors are used and some of 
them have their IDs set to [ALL], they cannot be 
controlled separately from the projectors with other 
ID numbers.
 
z
Refer to “Setting Remote control ID numbers” 
(
 page 22) regarding the method to set the ID 
number on the remote control.