Manualsbrain.com
  1. Manuals
  2. Brands
  3. Panasonic
  4. PT-DZ770E
  5. Operating Guide

Panasonic PT-DZ770E Operating Guide

Download
Page of 124
[PROJECTOR SETUP] menu
70 - ENGLISH
Settings
 
z
To delete a command already set, press the 
<DEFAULT> button on the Step 
6) screen, or select 
[DELETE] on the Step 
7) screen and press the 
<ENTER> button.
 
z
If multiple commands have been set for the same 
time, they are executed in chronological order 
starting from the smallest command number.
 
z
The operating time will be the local time.(
 page 73)
 
z
If an operation is executed with the remote control 
or control panel of the projector or with a control 
command before the command set in [SCHEDULE] 
is executed, the command set with this function 
may not be executed.
[STARTUP INPUT SELECT]
Set the input signal when the power is turned on.
1)  Press ▲▼ to select [STARTUP INPUT 
SELECT].
2)  Press ◀▶ to switch [STARTUP INPUT 
SELECT].
▶
z
The setting will change as follows each time 
you press the button.
[LAST USED]
[RGB1]
[RGB2]
[HDMI]
[VIDEO]
[DVI-D]
[S-VIDEO]
[LAST USED] Keep the input selected last time.
[RGB1]
Set the input when the power is 
turned on to RGB1.
[RGB2]
Set the input when the power is 
turned on to RGB2.
[VIDEO]
Set the input when the power is 
turned on to VIDEO.
[S-VIDEO]
Set the input when the power is 
turned on to S-VIDEO.
[DVI-D]
Set the input when the power is 
turned on to DVI-D.
[HDMI]
Set the input when the power is 
turned on to HDMI.
[RS-232C]
Set the communication conditions of the <SERIAL 
IN>/<SERIAL OUT> terminal.
1)  Press ▲▼ to select [RS-232C].
2)  Press the <ENTER> button.
▶
z
The 
[RS-232C] screen is displayed.
3)  Press ▲▼ to select an item.
▶
■To set the communication 
condition of the <SERIAL IN> 
terminal
4)  Select [(IN) BAUDRATE] in Step 3).
5)  Press ◀▶ to switch [(IN) BAUDRATE].
▶
z
The setting will change as follows each time 
you press the button.
[9600]
[19200]
[38400]
6)  Press ▲▼ to select [(IN) PARITY].
7)  Press ◀▶ to switch [(IN) PARITY].
▶
z
The setting will change as follows each time 
you press the button.
[NONE]
[EVEN]
[ODD]
▶
■To set the communication 
condition of the <SERIAL OUT> 
terminal
4)  Select [(OUT) BAUDRATE] in Step 3).
5)  Press ◀▶ to switch [(OUT) 
BAUDRATE].
▶
z
The setting will change as follows each time 
you press the button.
[9600]
[19200]
[38400]
6)  Press ▲▼ to select [(OUT) PARITY].
7)  Press ◀▶ to switch [(OUT) PARITY].
▶
z
The setting will change as follows each time 
you press the button.
[NONE]
[EVEN]
[ODD]
▶
■To set the response
4)  Select [RESPONSE(ID ALL)] in Step 3).
5)  Press ◀▶ to switch [RESPONSE(ID 
ALL)].