Panasonic CZ256ESMC2 Operating Guide

79

When connecting external signals, refer to the Installation Instructions (end of this manual) for 
detailed information about the electrical specifi cations.

8.1 Pulse Meter Input

You can measure energy usage by connecting pulse meters (gas, fuel, and electricity meters).
If you do not need to view information about energy usage, there is no need to install pulse meters.

1) Input locations

The communications connector panel on the side of the intelligent controller or on an optical 
communication adaptor connected to the intelligent controller:
 

P1 (No.7), P-COMM (No.6) …… Gas meter, fuel meter

 

P2 (No.8), P-COMM (No.6) …… Electricity meter 1

 

P3 (No.9), P-COMM (No.6) …… Electricity meter 2

*  The above are factory default settings. If necessary, you can change the type of pulse meter (power meter 

or gas meter).

  See “6.3.5 Making pulse meter settings” for more information.

2) Operation

Each pulse is counted.

The amount of energy consumed per pulse (m

3

, kWh, liters) must be defi ned by “

Main

Sub

 

Pulse meter setting”.
See “6.3.5 Making pulse meter settings”.

CZ-256ESMC2_EN.indb   79

CZ-256ESMC2_EN.indb   79

9/14/2011   3:17:16 PM

9/14/2011   3:17:16 PM