Panasonic NA168VG4 Operating Guide
Installation Instructions - 33
Moving and Installing
Installing the anchor bolts
Unscrew and remove the cover caps.
1.
Pull the bolts out until their tips are
2.
level with the tips of the sleeves.
Have someone else hold the top of the
drum and pull it forward.
Insert the transportation guards.
3.
Tighten each bolt so that spring
4.
extends out by 26 mm.
B
Levelling the appliance
Using a level facilitates the making of
adjustments.
To adjust the stands, use the ‘A’ end of the
To adjust the stands, use the ‘A’ end of the
spanner.
B
A
On each stand, loosen the lock nut by
1.
turning it clockwise.
Adjust each stand by turning it
Adjust each stand by turning it
2.
clockwise or anticlockwise.
Use a spirit level to make sure that
Use a spirit level to make sure that
3.
the appliance is properly levelled.
Tighten each lock nut by turning it
Tighten each lock nut by turning it
4.
anticlockwise.
Caution
Make sure that all lock nuts are
Make sure that all lock nuts are
tightened securely and the stands
are still bolted to the appliance.
If they are unbolted, the appliance will
If they are unbolted, the appliance will
move around.
Same level
26 mm
Lock nut
Stand
NA-140VG4_English_UK.indb 33
2012-6-13 18:45:21
Installation Instructions - 33
Moving and Installing
Installing the anchor bolts
Unscrew and remove the cover caps.
1.
Pull the bolts out until their tips are
2.
level with the tips of the sleeves.
Have someone else hold the top of the
drum and pull it forward.
Insert the transportation guards.
3.
Tighten each bolt so that spring
4.
extends out by 26 mm.
B
Levelling the appliance
Using a level facilitates the making of
adjustments.
To adjust the stands, use the ‘A’ end of the
To adjust the stands, use the ‘A’ end of the
spanner.
B
A
On each stand, loosen the lock nut by
1.
turning it clockwise.
Adjust each stand by turning it
Adjust each stand by turning it
2.
clockwise or anticlockwise.
Use a spirit level to make sure that
Use a spirit level to make sure that
3.
the appliance is properly levelled.
Tighten each lock nut by turning it
Tighten each lock nut by turning it
4.
anticlockwise.
Caution
Make sure that all lock nuts are
Make sure that all lock nuts are
tightened securely and the stands
are still bolted to the appliance.
If they are unbolted, the appliance will
If they are unbolted, the appliance will
move around.
Same level
26 mm
Lock nut
Stand
NA-140VG4_English_UK.indb 33
2012-6-13 18:45:21
Installation Instructions - 33
Moving and Installing
Installing the anchor bolts
Unscrew and remove the cover caps.
1.
Pull the bolts out until their tips are
2.
level with the tips of the sleeves.
Have someone else hold the top of the
drum and pull it forward.
Insert the transportation guards.
3.
Tighten each bolt so that spring
4.
extends out by 26 mm.
B
Levelling the appliance
Using a level facilitates the making of
adjustments.
To adjust the stands, use the ‘A’ end of the
To adjust the stands, use the ‘A’ end of the
spanner.
B
A
On each stand, loosen the lock nut by
1.
turning it clockwise.
Adjust each stand by turning it
Adjust each stand by turning it
2.
clockwise or anticlockwise.
Use a spirit level to make sure that
Use a spirit level to make sure that
3.
the appliance is properly levelled.
Tighten each lock nut by turning it
Tighten each lock nut by turning it
4.
anticlockwise.
Caution
Make sure that all lock nuts are
Make sure that all lock nuts are
tightened securely and the stands
are still bolted to the appliance.
If they are unbolted, the appliance will
If they are unbolted, the appliance will
move around.
Same level
26 mm
Lock nut
Stand
NA-140VG4_English_UK.indb 33
2012-6-13 18:45:21
Installation Instructions - 33
Moving and Installing
Installing the anchor bolts
Unscrew and remove the cover caps.
1.
Pull the bolts out until their tips are
2.
level with the tips of the sleeves.
Have someone else hold the top of the
drum and pull it forward.
Insert the transportation guards.
3.
Tighten each bolt so that spring
4.
extends out by 26 mm.
B
Levelling the appliance
Using a level facilitates the making of
adjustments.
To adjust the stands, use the ‘A’ end of the
To adjust the stands, use the ‘A’ end of the
spanner.
B
A
On each stand, loosen the lock nut by
1.
turning it clockwise.
Adjust each stand by turning it
Adjust each stand by turning it
2.
clockwise or anticlockwise.
Use a spirit level to make sure that
Use a spirit level to make sure that
3.
the appliance is properly levelled.
Tighten each lock nut by turning it
Tighten each lock nut by turning it
4.
anticlockwise.
Caution
Make sure that all lock nuts are
Make sure that all lock nuts are
tightened securely and the stands
are still bolted to the appliance.
If they are unbolted, the appliance will
If they are unbolted, the appliance will
move around.
Same level
26 mm
Lock nut
Stand
NA-140VG4_English_UK.indb 33
2012-6-13 18:45:21
Installation Instructions - 33
Moving and Installing
Installing the anchor bolts
Unscrew and remove the cover caps.
1.
Pull the bolts out until their tips are
2.
level with the tips of the sleeves.
Have someone else hold the top of the
drum and pull it forward.
Insert the transportation guards.
3.
Tighten each bolt so that spring
4.
extends out by 26 mm.
B
Levelling the appliance
Using a level facilitates the making of
adjustments.
To adjust the stands, use the ‘A’ end of the
To adjust the stands, use the ‘A’ end of the
spanner.
B
A
On each stand, loosen the lock nut by
1.
turning it clockwise.
Adjust each stand by turning it
Adjust each stand by turning it
2.
clockwise or anticlockwise.
Use a spirit level to make sure that
Use a spirit level to make sure that
3.
the appliance is properly levelled.
Tighten each lock nut by turning it
Tighten each lock nut by turning it
4.
anticlockwise.
Caution
Make sure that all lock nuts are
Make sure that all lock nuts are
tightened securely and the stands
are still bolted to the appliance.
If they are unbolted, the appliance will
If they are unbolted, the appliance will
move around.
Same level
26 mm
Lock nut
Stand
NA-140VG4_English_UK.indb 33
2012-6-13 18:45:21
Transport i postavljanje
Postavljanje sidrenih vijaka
1. Odvrtite i maknite kapice poklopca.
1. Odvrtite i maknite kapice poklopca.
2. Izvlačite sidrene vijke sve dok
njihovi krajevi ne budu u istoj ravnini
s vrhovima tipli. Neka druga osoba
drži bubanj i vuče ga prema van.
3. Stavite osigurače.
4. Stegnite svaki sidreni vijak tako da
se opruga raširi 26 mm.
Podešavanje postolja uređaja
Uporaba libela olakšava podešavanje
postolja.
Da biste podesili postolje, upotrijebite kraj s
oznakom "A" na ključu.
1. Otpustite maticu na svakom postolju
tako da je okrenete u smjeru kazaljke
na satu.
2. Podesite svako postolje tako da ga
okrenete u smjeru kazaljke na satu ili
suprotno tome.
3. Provjerite pomoću libele je li uređaj
na ravnoj površini.
4. Stegnite svaku maticu okrećući je
u smjeru suprotnom od kazaljke na
satu.
Oprez
Provjerite jesu li sve matice dobro
Provjerite jesu li sve matice dobro
pričvršćene i jesu li sva postolja
pričvršćena na aparat.
Ako nisu, uređaj će se pomicati.
Ako nisu, uređaj će se pomicati.
Upute za postavljanje - 33
Ista razina
Matica
Postolje