Panasonic KXMB1530 Operating Guide

By using the scanner glass, you can send a page from
booklets or small size paper.

MSetNMCNMDN

MStartN

MRedialN

MQualityN

MFaxN

MSP-PhoneN

* The pictured model is KX-MB1520.

If the MFaxN light is OFF, turn it ON by pressing
MFaxN repeatedly.

If necessary, change the resolution and contrast
according to the type of document.
R To select the contrast, see page 38.
R To select the resolution, see page 38.

Dial the fax number.

Press MStartN to scan the document into memory.
Wait until “SCAN:PRESS SET” “SEND:PRESS
START” is displayed.

To send a single page:
Press MStartN.

To send multiple pages:
1. Place the next page on the scanner glass. A

MSetN
R To send more pages, repeat this step.

2. When all pages are scanned, press MStartN.

Note:
R To stop sending, see page 63.
R While talking to the other party using the

MSP-PhoneN, you can send a fax using the scanner

glass by pressing MStartN, and then M1N (To receive
a fax, press M2N).

R You can change the default operation mode (feature

#463 on page 53) and the timer before returning to
the default operation mode (feature #464 on
page 53).

To select the contrast
Adjust this setting depending on the darkness or
lightness of the document. 5 levels (low to high) are
available.
1. Press MQualityN repeatedly to display “CONTRAST”.
2. Press MCN or MDN to change the contrast.
3. MSetN

Note:
R You can save the previous contrast setting (feature

To select the resolution
1. Press MQualityN repeatedly to display

“RESOLUTION”.

2. Press MCN or MDN to change the resolution.

– “STANDARD”: For normal-sized characters.
– “FINE”: For small-sized characters.
– “SUPER FINE”: For very small-sized characters.
– “PHOTO”: For photographs, shaded drawings,

etc.

3. MSetN
R Using the “FINE”, “SUPER FINE” and “PHOTO”

settings will increase transmission time.

To redial the last number
MRedialN
R If the line is busy, the unit will automatically redial the

number 1 time.

Note:
R To stop sending, see page 63.

Reserving the fax transmission (Dual Access)
You can reserve a fax transmission even when the unit
is just receiving a fax or sending a fax from memory.
– Up to 3 reservations when sending
– Up to 4 reservations when receiving
1. Set the original during fax reception or fax memory

transmission.

2. Enter the fax number using the dial keypad or

phonebook.

3. When using the scanner glass, press MStartN. The

unit will scan 1 page. Place the next document on the
scanner glass and press MSetN. Repeat this until all
the documents are scanned, then press MStartN.
When using the automatic document feeder,
press MStartN (KX-MB1530 only).

R If the document exceeds the memory capacity, the

reservation for that document will be canceled. You
must send the entire document manually.

38

6. . Fax (KX-MB1520/KX-MB1530 only)