Panasonic KXTG6621FX Operating Guide

Page of 52
Making/Answering Calls
19
Call share
You can join an existing outside call.
To join the conversation, press {C} when the 
other handset is on an outside call.
Note:
L
To prevent other users from joining your 
conversations with outside callers, turn the 
privacy mode on (page 26).
Key lock
The handset can be locked so that no calls or 
settings can be made. Incoming calls can be 
answered, but all other functions are disabled 
while key lock is on.
To turn key lock on, press 8 for about 3 
seconds.
L
&
 is displayed.
L
To turn key lock off, press & for about 3 
seconds.
Note:
L
Calls to emergency numbers cannot be 
made until key lock is turned off.
Power back-up operation
When a power failure occurs, the charged 
handset temporarily supplies power to the 
base unit (power back-up mode). This allows 
you to make and receive calls using a handset 
during a power failure. The base unit will not 
perform any other functions. You can program 
“Power Failure” and the default setting is 
“Auto” (page 26). 
Important:
L
If a handset is not placed on the base unit 
when a power failure occurs, “Base no 
power Press 
ic is displayed. After 
pressing {ic} on the handset, place it on 
the base unit to start power back-up mode.
L
Power back-up mode will not work if the 
battery level of the power supplying 
handset is )/0)4.
L
Do not lift the power supplying handset from 
the base unit during power back-up mode.
L
Do not touch the handset’s charge contacts 
during power back-up mode.
L
If the battery level is low, the unit will not 
work sufficiently during power back-up 
mode. In addition, in case handset battery 
power runs out, we recommend connecting 
a corded-type telephone (without AC 
adaptor) to the same telephone line or to 
the same telephone line jack, if you have 
such a telephone jack in your house.
L
Calls cannot be made during a power 
failure until key lock is turned off (page 19).
Panasonic Ni-MH battery 
performance (supplied batteries) 
during power back-up mode
When the batteries are fully charged, 
operating time of the handset in power back-
up mode varies depending on usage.
– Continuous use of the handset in power 
back-up mode: 2 hours max.
– Continuous use of the handset other than a 
handset in power back-up mode: 3 hours 
max.
– Not in use in power back-up mode: 3 hours 
max.
Note:
L
Actual battery performance depends on 
usage and ambient environment. 
Making calls during a power 
failure
■ When only 1 handset is registered:
1
Lift the handset and dial the phone 
number. 
2
Within 1 minute, place the handset on 
the base unit.
L
Wait until speakerphone is turned 
on automatically and the call is 
made.
3
When the other party answers the call, 
keep the handset on the base unit and 
talk using the speakerphone.
4
When you finish talking, press {ic}.
Note:
L
In step 2, if you do not place the handset on 
the base unit within 1 minute, the power 
TG661x_662xFX(e).book  Page 19  Wednesday, March 2, 2011  2:31 PM