Panasonic DPMB311EU Operating Guide

#578

To erase all FTP destinations and SMB folder destinations stored in the unit.
R Disconnect the following cables before activating this feature.

– Telephone line cord
– USB cable
– LAN cable

M0N “NO” (default)
M1N “YES”

To erase FTP destinations:
1. MtN A MBNM5NM7NM8N
2. M1N A “YES” A MOKN
3. M1N A “YES” A MOKN A MtN

To erase SMB folder destinations:
1. MtN A MBNM5NM7NM8N
2. M1N A “YES” A MOKN
3. M0N A “NO” A MOKN
4. M1N A “YES” A MOKN A MtN

#580

To select LAN mode.

Important:
R To set this feature, make sure that:

– The unit is in standby mode.
– The document is not set on the automatic document feeder.
– The delayed send feature is not activated (feature #412 on page 58).

M0N “OFF”
M1N “WIRED” (default)
M2N “WIRELESS”

#581

If feature #580 is set to “WIRELESS”, you can check the status of the wireless
LAN connection by pressing MCN or MDN.

#582

To set up the wireless LAN connection using WPS-PBC. This feature is the same
feature as pressing the MWPSN button. See page 24 for details.

#583

To set up the wireless LAN connection using WPS-PIN. See page 24 for details.

#584

To set up the wireless LAN connection by finding the SSID automatically on the
network. See page 25 for details.

#585

To set up the wireless LAN connection by entering the required information
manually. See page 25 for details.

#586

To restore all wireless LAN connection settings.
M0N “NO” (default)
M1N “YES”
1. MtN A MBNM5NM8NM6N
2. M1N A “YES” A MOKN
3. M1N A “YES” A MOKN

*1 These features are available only when feature #580 is set to “WIRELESS”.

87