Panasonic KXMC6260E Operating Guide
3
2.2.2 Fax mis-dial prevention
2.2.3 Transferring received fax document automatically to email address
You can automatically transfer a received fax document (fax to email feature) to one or more email addresses.
Transferred messages will not be deleted from the unit.
To activate this feature, set the following:
Transferred messages will not be deleted from the unit.
To activate this feature, set the following:
– Set the fax to email destinations
Confirming the destination
before sending a fax
MBNM4NM2NM0N
before sending a fax
MBNM4NM2NM0N
M0N “Off” (default): Deactivate this feature.
M1N “On”: You can send a fax after confirming the destination. When the
displayed destination is correct, press MBlackN to send the fax.
M1N “On”: You can send a fax after confirming the destination. When the
displayed destination is correct, press MBlackN to send the fax.
Setting dial keypad entry
restriction
MBNM4NM2NM1N
restriction
MBNM4NM2NM1N
M0N “Off” (default): Deactivate this feature.
M1N “On”: If you do not wish to dial a fax number manually using the dial
keypad, activate this feature.
M1N “On”: If you do not wish to dial a fax number manually using the dial
keypad, activate this feature.
Note:
R If you select “On”, you cannot make redial calls to fax numbers entered
R If you select “On”, you cannot make redial calls to fax numbers entered
using the dial keypad.
R If you select “On”, the fax number re-entry setting (feature #422) will be
deactivated.
Setting the fax number
re-entry before sending
MBNM4NM2NM2N
re-entry before sending
MBNM4NM2NM2N
M0N “Off” (default): Deactivate this feature.
M1N “On”: If you dial a fax number manually using the dial keypad, you have to
re-enter the number and press MBlackN. When the 2nd entry number matches
the 1st entry number, you can send the fax.
M1N “On”: If you dial a fax number manually using the dial keypad, you have to
re-enter the number and press MBlackN. When the 2nd entry number matches
the 1st entry number, you can send the fax.
Setting the fax to email
destinations (LAN
connection only)
R This feature can be
destinations (LAN
connection only)
R This feature can be
programmed only through
the web browser interface.
the web browser interface.
Select email destinations where you want to automatically send received fax
documents to (up to 6 destinations).
documents to (up to 6 destinations).
Important:
R Program the email server settings, and the email destinations
R Program the email server settings, and the email destinations
beforehand.
1. Start Multi-Function Station.
2. [Utilities] A [Configuration Web Page] A [Advance Configuration]
3. Type “root” as the user name, then enter the password (feature #155).
2. [Utilities] A [Configuration Web Page] A [Advance Configuration]
3. Type “root” as the user name, then enter the password (feature #155).
A [OK]
4. Select the [Fax Feature] tab.
5. Click [Edit] next to [Send User].
6. Enter the email address, up to 63 characters.
7. [Submit]
8. Close the web browser.
5. Click [Edit] next to [Send User].
6. Enter the email address, up to 63 characters.
7. [Submit]
8. Close the web browser.
Note:
R To check the status of the last 15 transfers, click [List] next to [Result] in
R To check the status of the last 15 transfers, click [List] next to [Result] in
step 5.
MC6260E_leaflet_en.fm Page 3 Friday, April 15, 2011 3:27 PM